Bobcat 853H Service Manual Page 43

  • Download
  • Add to my manuals
  • Print
  • Page
    / 372
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 42
REMOTE START SWITCH
Procedure
The tool listed will be needed to do the following
procedure:
MEL1398 – Remote Start Switch
MEL1416 – Adapter Harness (853 Base Only)
The remote start switch is required when the service
technician is adjusting the steering linkage, checking the
hydraulic/hydrostatic system.
Lift and block the loader. (See Page 1–4.)
Raise the operator cab. (See Page 1–8.)
Disconnect the operator cab wire harness from the
engine wire harness.
Connect the remote start switch to the engine harness
connectors (Item 1) [A].
853 Base Only: Use MEL1416 adapter harness (Item 1)
[B]. Connect the adapter harness to the remote start
switch.
Disconnect the operator cab wire harness from the
engine wire harness.
Connect the adapter harness (Item 1) [C] to the engine
harness connectors.
Put jackstands under the front axles and rear
corners of the frame before running the engine
for service. Failure to use jackstands can allow
the machine to fall or move and cause injury or
death.
W–2017–0286
Never work on a machine with the lift arms up
unless the lift arms are secured by an approved
lift arm support device. Failure to use an
approved lift arm support device can allow the
lift arms or attachment to fall and cause injury
or death.
W–2059–0598
A
CD–11144
1
C
P–01191
1
853, 853H Loader
–1–29– Service Manual
853, 853H Service Manual #6720755 Preventive Maintenance Section Part 2 of 2
B
P–01190
1
Page view 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 371 372

Comments to this Manuals

No comments