FIXED TENSIONER PULLEY (Cont’d)
Checking Pulley End Play
Install the pulley/mounting bracket assembly in to vise.
Install a dial indicator on the pulley hub [A].
Move the pulley by hand, back and forth. The correct end
play is 0.005–0.013 inch (0,13–0,33 mm) [B].
If the end play is not correct, there is no adjustment.
Replace the hub, pulley and/or bearings.
A
CD–12655
–3–40–
853, 853H Loader
Service Manual
B
CD–12656
Comments to this Manuals